NJ Phillips ‘Push’ Injector
Dual-purpose injector is easily changed from feed tube to bottle mount (Draw-off caps for 20mm, 30mm and 33mm).
Well balanced and easy to fit as the bottle is centred over the injector.
‘Dial-a-dose’ system provides 10 quick and easy to select doses.
Ergonomic push action design to relieve fatigue.
NJ Phillips 2mL ‘Push’ Injector Product Flyer. (1.78 MB) – PDF
NJ Phillips mL ‘Push’ Injector Product Leaflet. (167 KB) – PDF
Overview & Resources
User Guide Download Information
NJ Phillips 2mL ‘Push’ Injector Product Flyer. (1.78 MB) – PDF
NJ Phillips 5mL ‘Push’ Injector Product Leaflet. (167 KB) – PDF
Push Injector
| Product | Dose Range | Increments |
| 2mL ‘Push’ Injector | 0.1mL – 2mL | 2mL |
| 5mL ‘Push’ Injector | 1mL – 5mL | mL |
Dual-purpose injector is easily changed from feed tube to bottle mount (Draw-off caps for 20mm, 30mm and 33mm).
Well balanced and easy to fit as the bottle is centred over the injector.
‘Dial-a-dose’ system provides 10 quick and easy to select doses.
Ergonomic push action design to relieve fatigue.
Instructions For Use
1 Remove injector from packaging.
2 USE WITH FEED TUBE: Attach the feed tube (not shown) to the inlet fitting (item 1) then attach to the vaccine pack using the bottle connection cap.
3 USE WITH BOTTLE ATTACHMENT: Fit the bottle attachment fitting to the injector making sure it fits correctly over the hanging hook (item 5). Connect the curved feed tube (item 2) to the inlet fitting (item 1).
Fit the vaccine pack into the locking neck of the bottle attachment by first turning the locking ring (item 4) in a clockwise direction until the locking tabs are open.
Place the pre-pierced bottle onto the centre needle (item 3) and push down fully.
Now secure by turning the locking ring (item 4) anticlockwise.
4 Attach the needle to the injector. DO NOT remove the nut. Place the needle hub into the needle mount (item 6) and turn clockwise to tighten.
Turn anticlockwise to remove the needle.
5 Set the dose to the maximum setting and prime the injector by squeezing the handle and lever (items 7 & 8).
Prime to ensure all air is removed from the cylinder.
6 When the injector is primed, set the dose in the dose window to your required setting.
2mL ‘PUSH’ INJECTOR SPARE PARTS KITS AVAILABLE
* NO SPARE PARTS KITS AVAILABLE.
2mL ‘Push’ Injector Parts Breakdown
| 1. Luer Lock Needle Nut | 9. 2mL Piston Plug | 17. Spring |
| 2. Luer Insert | 10.2mL Push Grip Handle | 18.Valve and Seal Ring |
| 3. Push Injector Pushrod | 11. Lever Push Injector | 19. Inlet Fitting |
| 4. Retainer Clip | 12. 2-5mL Return Spring | 20.20mm Bottle Mount Cap |
| 5. Spring | 13.Bottle Attachment Assembly | 21. 30mm Bottle Mount Cap |
| 6. Valve and Seal Ring | 14.2mL Dose Adjuster | 22.33mm Bottle Mount Cap |
| 7. 2mL Pushrod Spacer | 15.2mL Barrel | |
| 8. Seal Ring (010-S70) | 16.Seal Ring |
5mL ‘PUSH’ INJECTOR SPARE PARTS KITS AVAILABLE
* NO SPARE PARTS KITS AVAILABLE.
5mL ‘Push’ Injector Parts Breakdown
| 1. Luer Lock Needle Nut | 9. 5mL Dose Adjuster | 17. Lever Push Injector |
| 2. Luer Insert | 10.5mL Push Grip Handle | 18. 2-5mL Return Spring |
| 3. Push Injector Pushrod | 11. Bottle Attachment Assembly | 19. 20mm Bottle Mount Cap |
| 4. Retainer Clip | 12. 5mL Barrel | 20.30mm Bottle Mount Cap |
| 4. Retainer Clip | 13.Seal Ring | 21. 33mm Bottle Mount Cap |
| 6. Valve and Seal Ring | 14.Spring | |
| 7. Piston | 15.Valve and Seal Ring | |
| 8. Seal Ring (014-S70) | 16. Inlet Fitting |
Looking to get a NJ Phillips ‘Push’ Injector 4Tags might be able to help! Click HERE to find out more.