Realtrace RT600Bt Pro Handheld reader
The RT600 Pro is an IP66 rated, robust and easy to use 67cm stick reader. See IP66 rating details in tabs below.
Supplied with FREE case included.
Compatible with smart phones and suitable for a variety of specialist applications operating with a Dual BT4 chipset for connection with both iOS and Android devices. (Reading of ISO 11784/5 FDX-B, HDX and Temp Chips)
User Manual PDF (824 KB)
RT Driver .exe (5.18 MB)
RT Terminal Software .exe (40 kB)
Overview & RESOURCES
User Manual PDF (824 KB)
SOFTWARE
RT Driver .exe (5.18 MB)
RT Terminal Software .exe (40 kB)
- FCC CE Compliant
- Reads all NLIS and RFID tags (ear tags, bolus and injectables)
- Versatile, easy to use and easy to handle in outdoor field conditions
- Memory allows for 2,500 animal IDs
- Colour TFT, 1.54 inch, 240 x 240 pixel screen
- Lithium 7.4V, 3000 mA rechargeable battery – 160hrs continuous use
- Communication protocol: USB Port, Bluetooth 4, HID, BLE, BT4
- It doesn’t duplicate tags if a double read occurs.
- IOS & Android Apps available to download
- High quality LCD display with backlight and integrated loud speaker
- Data transfer can be done via USB, or on the fly through Bluetooth wireless connection
Functionality and Parameters
RT600PRO is a stick reader for low-frequency RFID tags reading. The reader supports FDX-B, FDX-A, HDX protocols tags reading in compliance with ISO 11784/11785 international standards. The product uses a 1.54-inch color high-definition display with up to 240*240 pixels.
In addition, the product also has a Bluetooth wireless communication function, which is convenient for real-time communication with the mobile phone, and the device can be controlled in all directions through the mobile APPs. The user can also communicate with the desktop devices through the USB data cable. The product has stable performance, simple operation, and is suitable for livestock animals and pets’ traceability applications.
The battery charge level is indicated in green on the right and at the top of the display.
The USB connector allowing the recharging of the battery as well as the connection to a peripheral is accessible by unscrewing the large screw at the bottom of the reader
Functionality and Parameters
| Working Frequency | ISO 11784/85 134,2Khz FDXB, HDX, |
| Chips type | EM 41XX, EM42XX , EM 4105, SIC 7888,SC 7999 |
| Reading range |
Glasstag 2 x12mm 18/20cm Eartag HDX 27mm 55/60cm Eartag FDX B 27mm 24/36cm |
| Power | Lithium battery 7,4V, 3000mA |
| Memory storage | 2500 ID number, Customizable upon request |
| Display | Color TFT, 1,54 inch, Pixel 240 x 240 |
| Multi languages | English, French, Polish, Spanish, Deutsch, Italian, Portuguese |
| Battery | 160h in continuous use |
| Weight | 430g |
| Communication | USB Port, Bluetooth 4, HID, BLE,BT4 |
| Indice IP | IP 66 |
| Operating temperature | -5°C / +50°C |
Looking to get a Realtrace RT600 Pro IP66 EID Stick Reader 4Tags might be able to help! Click HERE to find out more.
What are IP66 Characteristics:
- Complete protection from dust, oil, and other non-corrosive material.
- Complete protection from contact with enclosed equipment.
- Protection from water, up to water projected by a nozzle against enclosure from any direction.
- Able to protect against powerful water jets.
- Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects.
- Test duration: at least 3 minutes; Water volume: 100 litres per minute; Pressure: 100 kPa at distance of 3m.
To help out, there are several rating systems that have been developed and several testing agencies that verify the results. Among these, the two best known are NEMA and IP.
We will cover the IP system here. Quick Summary of the Main Differences Between IP65, IP66, and IP67 Touchscreens Depending on your project, the differences between these three ratings can be very important. A touchcreen solution rated with any of the three of these ratings is equally protected against dust, dirt, sand, and debris (as indicated by the “6” digit). The liquid/water protection for each of these three ratings is unique.
- IP65 – Water resistant
- IP66 – Water resistant against powerful jets
- IP67 – Protected against complete temporary water submersion
This software is a tool supplied free of charge to all users of the RFID Realtrace Bluetooth reader.
It enables the Bluetooth communication to be automatically restored between a PC running on Windows and the RFID RealTrace reader if it is cut.
You will find that once the communication has been established between a PC and the RealTrace reader both appliances which were previously paired up remain connected providing that they are separated by no more than 10 meters. The communication is cut if the distance is over 10
meters, and a search and pairing up must be performed to restore transmissions.
The communication is also cut when the RealTrace reader switches off after several minutes on standby to save energy in the 9 volt battery.
The lost communication in both these cases is connected to the way Bluetooth technology operates as well as the Windows operating system. The « Realtrace terminal » software reduces this problem by enabling communication between a PC and the RFID reader to be quickly and
easily restored.
Initial parameterization of the « RealTrace Terminal » software
After installing the software on your PC, click on « File » then « Properties » then enter the Bluetooth's communication port number as well as the following data :
- bits per second : 9600
- data bits : 8
- stop bits :1
- parity : none
- flow control : none
Using the software
« File » menu
The « Save », « Delete », « Print» and « Leave » functions are standard.
When selected, the « Link to an application » function enables the data sent by the reader to a PC to be linked with a Windows application, simultaneously with the display in the « RealTrace Terminal » window.
« Connection » Window
If there is a break in the communication between the PC and the reader simply select «connect » to automatically restore connection after a maximum period of 15 seconds.
The time remaining before the automatic connection is displayed in the window in the bottom right of the screen. Obviously the reader must be switched on before reconnection can occur, and it must be within a radius of 10 meters of the PC which itself must be functioning.
« Option » menu
The « display all the data » heading enables the screen display of the data sent by the reader to be modified. If this heading is selected all the charact ers received are displayed i.e. the order number, type of transponder (EM4102, FDXA,FDXB, HDX), chip identifier number and CRC.
If the « display all the data » heading is not selected, only the order number and identifier are displayed on the screen.